Click image to view full size image
Model C5112/C5116/C5120, C5123/C5126 series of single column vertical lathe, which fine grounded gears in the gearbox to ensure high precision, low noise and long life. Versatile accessories and good service. Just start production immediately after got it. Many options, German MECANO panel box, roller guideway table, higher table stand, etc.
Â
Â
|
Specification |
Unit |
C5112 |
C5116 |
C5120 |
C5123 |
C5126 |
|
|
Max.cutting diameter of vertical tool post |
mm |
1250 |
1600 |
2000 |
2300 |
2600 |
|
|
Max.cutting diameter of side tool post |
mm |
1100 |
1400 |
1800 |
2000 |
2400 |
|
|
Max.cutting height |
mm |
1000 |
1000/1400 |
1250 |
1350 |
1600 |
|
|
Work table |
diameter |
mm |
1000 |
1400 |
1800 |
2000 |
2250 |
|
max. loading |
t |
3.2 |
5 |
8 |
8 |
10 |
|
|
speed range |
rpm |
6.3-200 |
5-160 |
3.2-100 |
3.2-100 |
2-63 |
|
|
step range |
step |
16 |
16 |
16 |
16 |
16 |
|
|
max. torque |
kn. m |
17.5 |
25 |
25 |
25 |
35 |
|
|
Vertical tool post |
feeding rang |
mm/min |
0.8-86 |
0.8-86 |
0.8-86 |
0.8-86 |
0.8-86 |
|
feed steps |
step |
12 |
12 |
12 |
12 |
12 |
|
|
cutting force |
kn |
20 |
25 |
25 |
25 |
25 |
|
|
vertical travel |
mm |
650 |
800/1000 |
800/1000 |
800/1000 |
1000 |
|
|
horizontal travel |
mm |
700 |
915 |
1200 |
1300 |
1500 |
|
|
swing angle |
° |
±30 |
±30 |
±30 |
±30 |
±30 |
|
|
Side tool post |
feed range |
mm/min |
0.8-86 |
0.8-86 |
0.8-86 |
0.8-86 |
0.8-86 |
|
cutting force |
kn |
20 |
20 |
20 |
20 |
20 |
|
|
vertical travel |
mm |
900 |
900 |
900 |
900 |
900 |
|
|
horizontal travel |
mm |
630 |
630 |
630 |
630 |
630 |
|
|
Cross beam travel |
mm |
650 |
650/1050 |
850 |
1050 |
1250 |
|
|
Beam lifting speed |
mm/min |
350 |
350 |
350 |
350 |
320 |
|
|
Tool bar section size |
mm |
30*40 |
30*40 |
40*40 |
40*40 |
40*40 |
|
|
Main motor |
kw |
22 |
30 |
30 |
30 |
37 |
|
|
Machine weight |
t |
8.5 |
12.4/14.8 |
17 |
18 |
26/28 |
|
|
Overall dimension(L*W*H) |
mm |
2360*2280 *2800 |
2830*2670 *3010 |
3200*2800 *3250 |
3210*2850 *3300 |
3300*4000 *3500 |
|
Â
Â
1. Advance modular Design based on FEM. Integrated mechanical, electrical and hydraulic tech.
niques, Guarantee excellent machining performance.
2. High grade casting from own foundry, Good heat treatment process, Hardened guideway(above HRC50). Perfect long lifetime and stable accuracy.
3. Turret indexed by curvic coupling with 120 divided teeth, more rigid than traditional 5 divided coupling plate.
4. PLC control made by OMRON Japan fine layout and cabling in cabinet. special careful selected components for super reliability.
5. Two axis DRO and scales is standard.
6. 16 steps speeds change by electronic valve controller, easily, sensitively and reliably.
Â
Â
The worktable adopts a dynamic pressure guide rail, and its main shaft is equipped with two NN3000 type double row short cylindrical roller bearings. The inner ring has a taper to adjust the radial clearance. Both bearings have oil flow for lubrication and ensure the axial and radial accuracy of the worktable. There are four manual jaws on the worktable.
Â
The vertical column is connected with the base of the worktable, and its material is made of high-strength, low-stress cast iron, and a beam lifting mechanism is provided at the upper end of the column. Driven by an AC motor, the beam moves up and down on the vertical column.
Â
Single column vertical lathe is suitable for high-speed steel cutter, carbide cutter and all kinds of high performance cutter, which can make rough and finish turning for inside and outside cylindrical, conical, end face, grooving and etc.
The lubrication method mainly adopts centralized lubrication station for timing and quantitative centralized lubrication.
Â
Â
GB9061-1988 metal cutting lathe general technical conditions
GB/T23582.1-2009 vertical lathe accuracy inspection
Â
Â
http://www.haidimachinery.com/